Highest precision and performance floating point DSP module for radar, sonar, image processing, ultrasonics, and other demanding applications
3000 MFLOPS, 500 MHz, Analog Devices ADSP-TS203 TigerSHARC IEEE floating point processor
High bandwidth interfaces to data acquisition peripherals and FPGAs: 500M-Bytes/s parallel bus, 1G-Byte/s Link Ports
High-speed USB2.0 peripheral controller
Dual UART with auto-flow control, receive and transmit FIFOs, RS232 and RS422/485 interface
128 macrocell in-system programmable User-CPLD
Large on-board memories: 64M-Byte SDRAM, 8M-Byte Flash
3.3V single-supply, Supervisor and Watchdog
D.Module.BIOS programming support for all on-board resources, USB / RS232-based Setup Utility for convenient field-maintenance
Ordering Info: Part No. See below
Description
The D.Module2 series represents the next generation of high-performance,stand-alone DSP boards. These boards are optimized for highest I/O bandwidth to satisfy
demanding applications. The 32-bit wide external bus, configured in synchronous mode, can transfer
up to 533 Mbytes/s of data between DSP and peripherals.
The self-stacking design allows users to build complete signal
processing systems by stacking the required DSP, I/O, data acquisition,and networking modules. If data preprocessing is needed an FPGA module can be inserted
between data acquisition and DSP.
Besides the high-speed peripheral bus all D.Module2 DSP boards provide a variety of interfaces: two UARTs, an USB2.0 peripheral controller, user-programmable I/O ports, and synchronous serial interfaces. An extra connector
is reserved for DSP-specific extensions like the video ports available on the DM642 module.
Ordering Information
D.Module2.TS203-500: Standard module
Option: -I Industrial temperature grade
Option: -422 two RS422/485 line interfaces
Option: -232 two RS232 line interfaces
DS.TS203: Development Base Package (base board, psu, RS232 and USB cable, user's guide and support software)
