Versatile, high performance, lower power, floating point DSP board with TMS320C6467 2400 MIPS/1800 MFLOPS, 64Mbytes SDRAM with 512M bytes/s throughput and 100MHz peripheral bus provide adequate processing power and bandwidth for demanding applications. Communication interfaces are USB2.0, USB1.1 with host capability, two UARTs with RS232 and RS422 line drivers, and a 100Base-T Ethernet Controller with 2-port switch.

The OMAP-L137 Floating Point Starter Kit gives the user access to the OMAP-L137 device with a 300MHz. C674x VLIW DSP floating point processor with an ARM926EK-S processor operating up to 300MHz. The board has interfaces for USB, Ethernet, RS-232, SD/MMC/MMC Plus, and a TLV320AIC3106 stereo codec. For ease of debug the board comes with on board USB to JTAG Emulation. The Kit includes:

• An evaluation board with the OMAP-L137 device
• EVM board specific version of Code Composer Studio IDETM
• Demo version of Montavista Pro 5.0
• User documentation (Quick Start Guide, EVM Technical Reference)
• Cables (USB, Ethernet, RS-232, Stereo)
• Power supply with 3 line cords

This OMAP-L137 platform is ideal for developing applications requiring USB or Ethernet connectivity, high speed encoding, or professional audio.

With the addition of a 720MHz ARM Cortex-A8 processor providing 1,400 Dhrystone MIPS and a 520MHZ TMS320C64x DSP, the new OMAP3530 processor accelerates access to productivity applications, web pages, audio and video attachments and video conferencing applications.

The eZdsp F288335 is the socketless version of the original eZdsp F28335. This gives the user a lower cost entry point into the TMS320F28335 develoment process. The board contains a TMS320F28335 Digital Signal Controller (DSC) operating at 150MHz with an on chip floating point unit. The board has multiple expansion connections to interface to a variety of application specific hardware. In addition built in CAN and RS-232 connectors are available. The eZdsp F28335 also has a built in USB to embedded JTAG emulator for software debug and flash pogramming. The development kit includes:

• An eZdsp F28335 board (without socket)
• eZdsp F28335 Code Composer Studio DSK Tools
• User documentation (Quick Start Guide, EVM Technical Reference)
• USB Cable
• Power supply with 3 line cords

The eZdsp F28335 is ideal for applications requiring motor or motion control, programmable power supplies, or instrumentation requiring floating point arithmatic.

New DSP solutions for Digital Motor Control include a wide range of motor control kits based on TMS320F28335 (floating point) and TSM320F2812 (fixed point) DSPs from basic starter kits to the most sophisticated professional kits with source code application examples and MATLAB libraries.

We offer a wide range of excellent tools for the design of DSC-based motor control applications. Technosoft tools are modular, so by adding a new software/hardware module you can easily upgrade from a simpler kit to a more powerful one, as your project's complexity requires it.

X5-G12 PCI Express XMC Module with two 1GSPS 12-bit ADCs, 2GSPS, 12-bit single channel mode plus Xilinx Virtex-5 FPGA, 512MB DDR2 DRAM, 2MB QDR-II SRAM, 8 Rocket IO private links (2Gbps each), 1GB/s, 8 core PCI Express host interface.

X5-TX PCI Express XMC Module featuring four channels of 500MSPS, 16-bit DAC outputs with a Virtex-5 FPGA computing core, DRAM and SRAM memory, and eight lane PCI Express host interface. The DAC devices also support a mode providing two channels at a true 1 GSPS, 16-bit rate without interpolation.

In a compact 75mm x 50mm form factor the ZestET1 provides a dedicated hardware TCP/IP Offload engine (TOE) and companion FPGA for universal ethernet interfacing. Delivering over 200Mbytes/s sustained data rates and 6 microsec latency, the ZestET1 provide Gigabit Ethernet performance for real-time applications without having to integrate complex networking hardware and software.

KCL offer a cost effective bundle for developers to evaluate the National 3G SDI daughter card on the Cyclone III C120 development kit. The bundle comes with 100 Ohm termination resistors fitted to the CIII Dev Kit as required by the SDALTEVK daughtercard.

Two channel dual-link DVI output board for Altera FPGA development kits with HSMC expansion port.

The BVDC is designed for professional video equipment developers. The dual ASI/SD-SDI interfaces allow FPGA designs access to industry standard video transport signals. Based on the latest adaptive cable equalisers and drivers, the ASI/SDI interfaces produces excellent noise immunity up to cable lengths of 350m. A VCXO allows precise synchronisation to incoming ASI signals. Card is shipped with source code examples.

Gidel Altera FPGA products can now be programmed using the ImpulseC tool to program the FPGAs from C/C++.

Email sales@kanecomputing.com for further information.

Provides a common reference for systems working on different frequencies, such as Lyrtech acquisition boards (ADACMaster III) and add-on RF frond-end modules.