VoP (Voice-over-Packet) PTMC card compliant with TI/Telogy® voice software
Upto 12 TI TNETTV3010 DSP devices and (if network interface is required) WinPath 747 or 787 communications / network access processor
Highly scalable channel capacity
TDM-to-TDM and TDM-to-Network data flow paths supported
Network interfaces include GbE PHY (PTMC5), NET PHY front-panel, RMII (PTMC2/3), UTOPIA L1 and POS (PTMC3); network packet formats include VoIP and VoATM
Ordering Info:
Part No. Please Call
Description
The SigC5561-7x7-PTMC contains DSP resources, packet
aggregation, processing and routing functions, and TDM and
network interfaces in the standard PMC mechanical form-factor.
The card provides a scalable, high-density solution for next
generation VoIP and VoATM infrastructure and carrier class
products and equipment. The card is particularly intended for
applications where less space and fewer card slots are required.
In a typical VoIP or VoATM application, the SigC5561-7x7-PTMC
processes TDM channels of 64 kbps PCM (G.711) voice, fax, or
data traffic. Voice data is optionally compressed by Telogy DSP
software via G.726 (ADPCM) or LBR codec. Telogy software
provides RTP, RTCP, or T.38 packetization of voice and fax data,
and a wide range of voice and data telephony functions.
Applications for the SigC5561-7x7-PTMC include media gateways
and media servers, base-station processing, VoIP (voice-over
Internet protocol) networking functions, VoDSL (voice-over DSL),
soft-switches, SIP Nodes, and multiple-channel speech or audio
CODEC arrays. Specific product examples include:
