Kane Computing Ltd - Home Page
Kane Computing Ltd
Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com
Line Search:
Quick Product Finder
Products by Supplier
News
What's this?
Customer Success Stories
Press Releases
eNews (subscribe to enews)

Registered in England No: 4264387
Registered Office:
c/o Bulcock & Co. 10 The Bull Ring, Northwich, Cheshire, CW9 5BS, UK.

Kane Computing Ltd,
Suite I, Ascot Court,
71-73 Middlewich Road,
Northwich,
Cheshire, CW9 7BP
United Kingdom
Tel: +441606351006
Fax: +441606351007
Email: Sales-Support-Marketing
©Copyright: KCL 1986-2012

Federation of Small Businesses

XACQ-S2E Prototyping and High Speed Acquisition Board
XACQ-S2E

Features

  • Dual 10 bit, 20MHz ADC/DAC
  • Full duplex input/output
  • 200K Gate Xilinx SC2S200E FPGA
  • USB2.0 controller
  • Flash ROM to power up in standalone mode
  • TI DSK daughtercard
  • JTAG programming port and adaptor to programme the FPGA and FLASH ROM
  • 5V single supply operation
  • Size: 88mm x 92mm
  • 28 GPIO pins
  • 3 diagnostic LEDs
  • 3 input switches (1 tactile push button, 1 two-way DIP switch)
Ordering Info: Part No. XACQ-2SE

Description

XACQ-S2E is a Xilinx Spartan200E FPGA device based rapid acquisition/prototyping board which allows real time implementation of digital designs on multi platforms.

At the heart of XACQ-S2E, lies the 200K gate Xilinx XC2S200E FPGA. The digital connectivity to outside world is provided by a Cypress based CY7C68001 USB2.0 controller as well as by 2 headers compatible with Texas Instruments based DSK/EVM boards’ Memory and Peripheral Interfaces. A 10-bit ADC/DAC pair provides full duplex stereo IQ signal conversion at sampling rate up to 20MS/s.

XACQ-S2E contains 28 GPIO (general purpose input output) pins, 3 input switches and 3 LEDs for diagnostic and debug purposes.

XACQ-S2E has on board FLASH memory to support stand alone operations. A JTAG port lets the user programme the FLASH memory as well as the FPGA using a parallel port programming cable JTAG-PP.

This versatile product can be used as a standalone board booting from the on board FLASH memory, a hardware accelerator connected to the PC through the USB2.0 port or as a daughterboard plugged to the TI compatible DSP boards using EMIF/EPIF interface.

This product is ideal for use as a high speed acquisition card for quick development and testing and can also be used as an OFDM transmitter/receiver, a low data rate MIMO demonstrator or single carrier modem development platform.

Related Products

Line

Downloads

PDF Datasheet (PDF 796KB)

Links

Web Page XAD Communication's web site

Line